How to Choose a DTF Oven?

随着DTF行业越来越庞大， 选择DTF工艺的人越来越多。除了DTF打印机需要了解以外，我们也需要对烤箱有更多的了解。

As the DTF industry grows larger and larger, more and more people choose DTF processes. In addition to DTF printers, we also need to know more about ovens.

选择与打印机打印速度不匹配的烤箱，对成品有会产生巨大的影响；如反油、粉末未完全烘干、烤糊PET膜等。

Choosing an oven that does not match the printing speed of the printer will have a huge impact on the finished product, such as anti-oil, powder is not completely dried, PET film is burned, etc.

那么我们应该从哪几个方面来选择适合自己DTF打印机的烤箱呢？

So from which aspects should we choose the oven suitable for our DTF printer?

1、速度匹配

1.   Speed matching

根据不同类型的打印头，选择相对功率的烤箱。

According to the different types of print heads, choose the relative power of the oven.

如4头i3200的DTF打印机，应该选择有更多灯管和更长烘烤隧道的烤箱。

For a DTF printer with a 4-head i3200, you should choose an oven with more tubes and a longer drying tunnel.

2、场地大小

2.   Site size

如果场地有限，可以选择立式烤箱，它是小型用户的首选烤箱。这款机器占地面积小，而且它有足够长的烘烤隧道。

If the site is limited, you can choose a vertical oven, which is the preferred oven for small users. This machine has a small footprint, and it has a long enough drying tunnel.

如果场地宽裕，可以选择导带式烤箱，更多的功能，更好的烘烤能力。

If the site is sufficient, you can choose a mesh belt oven, with more functions, and better drying capacity.

3、每日产量

3.   Daily output

根据每天订单产量，选择足够烘干效率的烤箱。

Select an oven with sufficient drying efficiency according to the daily order output.

单体DIY用户：订单量不多，可以选择桌面式小型烤箱。

Single DIY users: the order volume is not large, you can choose a small desktop oven.

量产型用户：每天有足够的订单，可以选择导带式烤箱。

Mass production users: with enough orders every day, you can choose a mesh belt oven.

此外，我们应该需要知道烤箱的正确使用方式

In addition, we need to know the correct way to use the oven:

1、温度

1.   Temperature

推荐温度为120-150摄氏度，这个参数可以根据不同地区的温度进行调整。

The recommended temperature is 120-150 degrees Celsius, and this parameter can be adjusted according to the temperature in different regions.

确保烤箱的温度能足矣把粉末烘干。

Make sure the oven is hot enough to dry the powder.

2、时间长度

2.   Length of time

当温度已经调至最高之后，依旧粉末未完全烘干。

When the temperature has been set to the highest, the powder is still not completely dried.

那么我们可以降低一些打印速度让烘烤的时长变长。

So we can slow down the printing speed a little bit to make the drying time longer.

3、抖粉力度

3.   Powder shaking strength

调整抖粉力度能将多余的粉末从PET膜上抖掉即可。

The excess powder can be shaken off from the PET film by adjusting the shaking force.

力度过大可能会导致粉末从白墨涂层上拖落，导致压烫后的成品效果不佳。

Shaking the powder with too much force may cause the powder to drag off the white ink coating, resulting in poor results after heat pressing.

4、粉下落速度

4.   Powder falling rate

根据打印速度，保证PET膜中有足够多的粉末即可。

According to the printing speed, ensure that there is enough powder in the PET film.

如果粉末不够，可能会导致部分白墨图层没有粘上粉末，导致压烫后的成品粘性不佳。

If the powder is not enough, it may cause part of the white ink layer to not stick to the powder, resulting in poor viscosity of the finished product after heat pressing.

关于我们的烤箱

About our oven

1、【烘烤隧道更长】

1.   【Drying tunnel is longer 】

我们的烤箱有600mm和900mm甚至更长的烘烤隧道，保证粉末烘烤的质量和效果。

Our ovens have 600mm and 900mm or even longer drying tunnels to ensure the quality and effect of powder baking.

2、【多款烤箱选择】

2.   【Multiple oven choices 】

桌面式小型烤箱、立式烤箱、导带式烤箱，根据你的不同需求提供烤箱方案。

Tabletop small oven, vertical oven, mesh oven, according to your different needs to provide oven solutions.

3、【更多的加热管】

3.   【More heating tube 】

足够多的加热管，为了提升初始升温速度和烘烤能力。

Enough heating tubes to improve the initial heating rate and drying capacity.

4、【热量恒温系统】

4.   【Heat constant temperature system 】

烤箱初始升温时不会烤坏PET膜。

The initial heat of the oven will not destroy the PET film.

达到设定温度后，它能稳定温度。而且不会有与设定温度的高落差。

After reaching the set temperature, the temperature can be stabilized. There will be no high drop from the set temperature.

5、【温度保温】

5.   【Temperature insulation 】

烤箱内部保温效果明显，降低温度流失。提升粉末烘烤的质量。

The heat preservation effect inside the oven is obvious, reducing the temperature loss. Improve the quality of powder drying.

6、【挡粉神器】
6.   【 Innovative DTF Shaker Tool 】

有效减低粉末下落速度，变相提升工作效率。

Effectively reduce powder falling speed, disguised phase to improve work efficiency.

最后，我们需要定期为烤箱做检查

Finally, we need to check the oven regularly

1、电路老化

1.   Ircuit aging

检查各条线路的链接，避免电路出现老化，导致硬件烧坏。

Check the links of each line to prevent the circuit from aging and causing the hardware to burn out.

2、更换粉末

2.   Replace the powder

粉末应该定期更换，保证粉末是干爽的状态，如果粉末受潮，不应继续使用。

The powder should be replaced regularly to ensure that the powder is dry, and should not continue to be used if the powder is damp.

3、加热管检测

3.   Heating tube detection

定期检查加热管的加热状态，避免出现烘烤效果不佳，影响成品质量。

Check the heating state of the heating tube regularly to avoid poor drying effects and affect the quality of the finished product.

4、配件

4.   Accessories

常备一些配件，以防万一需要更换。

定期检查有助于打印效率提高，减少烤箱的问题影响订单生产。

Regular inspection helps to improve printing efficiency and reduce oven problems affecting production orders.